Continuous Band Sealers are designed for sealing plastic bags of thermoplastic materials of any size, length, and thickness up to 20 mil. The maximum seal width is 10mm. The variable conveyor belt speed is adjustable to accommodate materials varying in thickness. The conveyor belt can be raised or lowered and in some models, even tilted to the desired angle. It is equipped with an imprinter, or an ink coding system to record words, dates, and codes with each seal. Each machine comes with a tool box containing spare bands, teflon belts, tools, and a type set. Some models can be interchanged easily from horizontal to vertical to free standing positions with an optional conversion kit.

The machines are easy to operate. Turn on the power and the heat switch. When the preset temperature has been reached, place the bag in the positioning plate. The sealing band carries the bag forward and seals the bag instantly. No pushing or pulling is required.

 -Specification sheets available. Please call-
-Continuous Band Sealer parts also available-

1-888-898-2247

The CBS-880 is made of stainless steel construction with a sealing speed of 9-320 inches/minute and a seal width of 5/16". The sealing temperature ranges from 0-300 degrees Celsius, and the maximum conveyor load is 5.5 lbs. The manufacturer's replacement kit includes: 4 wheel belts, 20 teflon belts, 1 PC board, 1 rubber wheel, 2 screwdrivers, 2 wrenches, and 1 embossing kit. The embossing kit contains: 1 printing wheel, "EXP", "MFG", and numbers 0-9.

Stainless Steel Band Sealer
ITEM: Sealer CBS-880

$949.50

The HL-810M is similar to CBS-880 except the feeding is on the left side and this unit is also equipped with a hot ink coding imprinter. Manufacturer's kit includes 4 wheel belts, 20 Teflon belts, 1 rubber wheel, 1 PC board, 2 screwdrivers, 2 wrenches, and 1 embossing kit.
The embossing kit includes: 1 alphabet set (A-Z), 3 sets of numbers 0-9, 3 sets of "MFG", "EXP", and "LOT".
Power: 110/60HZ  Voltage: 570 watts  Seale width: 8mm
Character size: PT 10.5

Dry Ink Coding Stainless Steel Band Sealer
ITEM: Sealer HL-M810
WT: 85 lbs

$1187.50

The FRM-1120C is made of stainless steel. The seal head and conveyor may be tilted up to 30 degrees to allow for the sealing of free flowing products as wells as packages with some liquid content. It is equipped with a standard hot stamp imprinter, a fully adjustable stand, and a conveyor. The sealing speed is 0-320 inches/minute and the seal width is 5/16". The sealing temperature range is 0-300 degrees Celsius and the maximum conveyor load is 16 lbs. The manufacturer's kit includes 4 wheel belts, 20 Teflon belts, 1 printing wheels, 1 PC board, 1 wrench, 1 screwdriver, and 1 rubber wheel.

Stainless Steel Tilting Seal Head Band Sealer
ITEM: Sealer FRM-1120C

$2447.50

Picture
Not
Available

Based on the weight of load the conveyor belts can carry, different models are available to suit your requirement. This is not a stock item.

Vertical Continuous Band Sealer
ITEM: Sealer FRM-1120AL_M
WT: 580 lbs

$4375.00